Use of FOAM Fire Extinguisher

Hãy chia sẻ cảm xúc của bạn
Đã xem: 2597
Thích: 0
Không thích: 0
A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user (i.e. no escape route, smoke, explosion hazard, etc.), or otherwise requires the expertise of a fire department. Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent which can be disc-harged to extinguish a fire.

A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user (i.e. no escape route, smoke, explosion hazard, etc.), or otherwise requires the expertise of a fire department. Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent which can be disc-harged to extinguish a fire.

There are two main types of fire extinguishers: stored pressure and cartridge-operated. In stored pressure units, the expellant is stored in the same chamber as the firefighting agent itself. Depending on the agent used, different propellants are used. With dry chemical extinguishers, nitrogen is typically used; water and foam extinguishers typically use air. Stored pressure fire extinguishers are the most common type. Cartridge-operated extinguishers contain the expellant gas in a separate cartridge that is punctured prior to disc-harge, exposing the propellant to the extinguishing agent. This type is not as common, used primarily in areas such as industrial facilities, whe-re they receive higher-than-average use. They have the advantage of simple and prompt rec-harge, allowing an operator to disc-harge the extinguisher, rec-harge it, and return to the fire in a reasonable amount of time. Unlike stored pressure types, these extinguishers utilize compressed carbon dioxide instead of nitrogen, although nitrogen cartridges are used on low temperature (-60 rated) models. Cartridge operated extinguishers are available in dry chemical and dry powder types in the US and in water, wetting agent, foam, dry chemical (classes ABC and BC),and dry powder (class D) types in the rest of the world.

A fire extinguisher located in a middle school.

Fire extinguishers are further divided into handheld and cart-mounted, also called wheeled extinguishers. Handheld extinguishers weigh f-rom 0.5 to 14 kilograms (1 to 30 pounds), and are hence, easily portable by hand. Cart-mounted units typically weigh 23+ kilograms (50+ pounds). These wheeled models are most commonly found at construction sites, airport runways, heliports, as well as docks and marinas.

Video cùng thể loại

Quan hệ đối tác

- Một số hình ảnh tham gia hội thảo NFPA 2005 tại Las Vegas, Nevada, USA - Tham gia triển lãm hội thảo Ngành PCCC và M&E 2011 tại Long Beach California, USA  + Xem ảnh

Thăm dò ý kiến

Bạn biết đến công ty Thiên Đăng từ thông tin nào?

Thống kê
  • Đang truy cập235
  • Máy chủ tìm kiếm32
  • Khách viếng thăm203
  • Hôm nay27,237
  • Tháng hiện tại298,186
  • Tổng lượt truy cập27,505,918
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây
Gửi phản hồi